Docker containers are, without a doubt, a quick, easy, and convenient solution for your testing environment. But what about deploying a more loaded system using containers? How well will it run? Can Docker really be used in production?

We see video surveillance systems in various places — shops, malls, banks, hotels, office buildings, cottages and apartments, parking lots and busy intersections — it is difficult to name all possible options for installing cameras. There is also a great variety of different hardware and software solutions for organizing video surveillance: analog cameras and hardware video recorders of all kinds and colors, software solutions, cloud solutions, IP cameras that work both offline and with server or software solutions etc. Of all options, we are interested in those that provide video streams via RTSP.

It’s hard to imagine video streaming without recording. Recording video streams is one of the most demanded functions that can be used in various work scenarios, for example, video messages, video surveillance archive, recording interviews, video shooting outdoors and order viagra online pills many others.

In our blog, we have been recently looking at all kinds of stress tests. In one of the previous articles we tested one of the common server operation scenarios — “One stream, many viewers.” In this scenario, one WebRTC video stream is published on the server and a large number of viewers connect to view this stream. This is how, for example, the competition broadcast works: the broadcast is on, and the users are watching. But quite often you need to implement another approach — “Many streams, many viewers” — when many WebRTC streams are published on the server at the 5mg viagra cost same time and each published stream has one viewer. This option can be used to organize a simple one-on-one video chat without using a mixer or MCU.

In this article, we will analyze the method in detail and conduct a stress test to simulate the connection of 200 users, each of whom simultaneously publishes and views WebRTC streams.

Mixing is a rather popular tool among streamers.

Mixers can be found under the hood of many products, most common of which are chats, video conferencing systems, and basic surveillance systems.

In a previous article we already discussed how to load test and choose the right server depending on the tasks and order cheap amoxil usa budget.

The testing turned out to be a “spherical chicken in vacuum.” We published a stream on one WCS, which we then retrieved a number of times with a second WCS, and, based on the results of these tests, drew conclusions about the hardware efficiency.

Such a test of one server with another of the same kind is not a completely independent test. In this case, the stream subscription procedure is somewhat simplified for the server under test, compared to the browser in which the free tadalafil trial end user will watch the stream. Therefore, the test results will be somewhat different from the real picture.

The simplest and most logical way to test is to perform a manual test – open the browser, open the tab with the player, specify the stream name and click “Play.” Repeat 1000 times.

And that’s where this all falls apart. First, you have to run the player 1000 times. I doubt it will be easy! Secondly, you need to prepare a cluster of several powerful servers to run the browser with a thousand tabs on which the video will be played. Thirdly, the manual test under these conditions will take quite a long time. For these reasons, the manual test should not be considered as one of the load testing methods.

In this article we’ll review another way of testing — using a Нeadless-browser and compare the results of such testing with testing based on stream capture.

John was happy. He’d just turned in a commission and he was enjoying a relaxing evening. Hours upon hours of development, optimization, testing, changes and approvals were left behind.

And just as he was contemplating picking up a nice cold beer, his phone rang.

“Only half the viewers could connect to the stream!” — said the voice on the other side of the line.

With a resigned sigh, John opened up his laptop and started pouring through logs.

Unfortunately, in all of those many tests, he never considered that a big number of viewers would mean great strains for the server infrastructure and 50mg cialis cost the network itself.

Frequent requests to our support include questions about organizing monitoring for WebRTC streaming. As a rule, it is important for a streamer to know what is happening on the “other side” – i.e. to assess the stream quality, the number of viewers and other parameters. The quality of the stream, as has already been discussed many times, is not constant and depends on many factors, such as the load on the server with or without transcoding, and the use of TCP or UDP transport protocols, and the presence of packet loss and/or NACK feedbacks, etc. All these data for assessing stream quality can be obtained manually from various sources.

Stream degradation is a condition of a video/audio stream, in which the picture and sound quality is not satisfactory. There are artifacts, friezes, stuttering, or out of sync sound.

The Internet is full of guides on how to record what’s happening on the screen into a file using FFmpeg. In this article, we’ll go a step further and we’ll see how to broadcast screensharing via FFmpeg and create a stream on your site.

It goes without saying that there are many streaming solutions out there, both paid and buy diflucan cheap free. FFmpeg, however, retains its prominence thanks to its cross-platform support, minimalist interface (which is non-existent, since the control is executed through the OS console) and its vast functionality. There are many FFmpeg-based programs for file conversion. FFmpeg is absolutely self-sufficient. You don’t need to search for a movie online, you don’t need to download and install codecs. All you need is a single file (ffplay.exe), that contains all the necessary codecs.

We can sing it praises all day, but today we’re here for a different reason.

Let’s go!

And once again we come back to development of webinar hosting systems. Online workshops, web-conferences, online meetups, presentations and web guides — all that, in one form or another, is related to webinars.

Imagine: your customer is hosting a webinar that involves a slide presentation. There might be a need for them to manually draw something over the slides or make notes over them. As a developer, you need to provide the customer with a tool that can do that. This is where you can resort to Canvas streaming.

In this article we will take a look at what Canvas streaming is and the the pitfalls of working with it.